CREATIVE INDUSTRIAL SYSTEMS, LLC

2965 Pittsburgh Road | Perryopolis, PA 15473 | P: 724-736-2500 | F: 724-736-8082

gary@creativeindustrialsystems.com

sales@creativeindustrialsystems.com

Honeywell E-Stops Mounting Bracket

(CPS-BRACKET)

SLK-1W-LED

-Mounting slots or tongue can be mounted facing in or facing out

-All hardware included

-Will work with all Honeywell Emergency Stop Units

SLK-2W-LED

Emergency Stops

SLK-1W  (HONEYWELL 1CPSA1)

Single span cable pull with broken/slack cable detect, 1NO & 1NC

SLK-1W-2 (HONEYWELL 1CPSA2)

Single span with broken slack cable detect, 2NO & 2NC

NOSLK-1W (HONEYWELL 1CPSA1-N)

Single span cable pull without broken/slack cable detect, 1NO & 1NC

1CPSA1-N Honeywell E-Stop pull cord switch, single span with no broken/slack cable detect, 1no and 1nc contact block and No indicating light
1cpsa1, Honeywell E-Stop Pull Cord Switch, Single Span with Broken/Slack Cable Detect, 1NO and 1NC Contact Block and NO indicating Light

SLK-1W-M (HONEYWELL CLSB4B)

Single head momentary pull cord switch, direct acting, 1NO & 1NC

 

1CPSA2B 1CPSA1A E-Stop pull Cord switch, single span with Broken/slack cable Detect, 2NO and 2NC Contact Block and 120VAC indicationg light

SLK-1W-LED (HONEYWELL 1CPSA1B)

Single span emergency stop with broken/slack cable detect and led, 120 VAC LED, 1NO & 1NC

SLK-1W-LED-2 (HONEYWELL 1CPSA2B)

Single span emergency stop with broken/slack cable detect and led, 120 VAC LED,  2NO & 2NC

SLK-1W-LED-24VDC (HONEYWELL 1CPSA1A)

Single span cable pull with broken/slack cable detect, 24 VDC LED, 1NO & 1NC

SLK-1W-LED-24VDC-2 (HONEYWELL 1CPSA2A)

Single span cable pull with broken/slack cable detect, 24 VDC LED, 2NO & 2NC

NOSLK-1W-LED (HONEYWELL 1CPSA1B-N)

Single span cable pull without broken/slack cable detect and led, 120 VAC LED,  1NO & 1NC

1CPSA1A1 Honeywell E-Stop Pull Cord Switch, Dual Span with broke Slack cable Detect, 2NO and 2NC Contact Block and No indicating Light

SLK-2W (HONEYWELL 2CPSA1A1)

Dual span cable pull with broken/slack cable detect, 2NO & 2NC

NOSLK-2W (HONEYWELL 2CPSA1A4)

Dual span, no slack cable detect, 2NO & 2NC

2CPSA1A1B Honeywell E-Stop Pull Cord Swithc, Dual Span with borken/Slack cable detect, 2NO and 2NC Contact Block and 120VAC indicating light

SLK-2W-LED (HONEYWELL 2CPSA1A1B)

Dual span emergency stop with broken/slack cable detect and led, 120 VAC LED, 2NO & 2NC

SLK-2W-LED-24VDC (HONEYWELL 2CPSA1A1A)

Dual span cable pull with broken/slack cable detect, 24VDC led, 2NO & 2NC

NOSLK-2W-LED (HONEYWELL 2CPSA1A4)

Dual span cable pull, no slack cable detect with 120 VAC LED, 2NO & 2NC

Cable & Cable Kits

SLK-R7-1W

Red (Yellow Available)Vinyl-Coated 7X7 Strand Galvanized Aircraft Cable

Bare Cable Diameter: 1/8", Coated Cable Diameter: 3/16" O.D.

Weight: 28.5lbs. per 1000ft, Minimun Break Strength: 1,700lbs.

Cut to Length (5000ft. Maximum Length)

(Note: "ZZZZ" = Length of Cable in Feet)

SUPPLIED WITH HARDWARE FOR CONNECTION OF MOUNTING BRACKET TERMINAL ENDS

 

SLK-R7-2W

Red (Yellow Available) Vinyl-Coated 7X7 Strand Galvanized Aircraft Cable

Bare Cable Diameter: 1/8", Coated Cable Diameter: 3/16" O.D.

Weight: 28.5lbs. per 1000ft, Minimun Break Strength: 1,700lbs.

Cut to Length (5000ft. Maximum Length)

(Note: "ZZZZ" = Length of Cable in Feet)

SUPPLIED WITH HARDWARE FOR CONNECTION OF MOUNTING BRACKET TERMINAL ENDS

50 Foot Cable Starter Kit Options

Mounting detail for emergancy stop pull card assemblies

7'-6" Intermediate Cable Assembly Options

 

SLK-R7-7.5

7'-6" Length of Red Vinyl-Coated 7X7 Strand Galvanized Aircraft Cable

Bare Cable Diameter: 1/8", Coated Cable Diameter: 3/16" O.D.

Weight: 28.5lbs. per 1000ft, Minimun Break Strength: 1,700lbs.

Supplied with Eyebolt and Hex Nuts for Cable support at 7'-6" Intervals

 

SLK-Y7-7.5

7'-6" Length of Yellow Vinyl-Coated 7X7 Strand Galvanized Aircraft Cable

Bare Cable Diameter: 1/8", Coated Cable Diameter: 3/16" O.D.

Weight: 28.5lbs. per 1000ft, Minimun Break Strength: 1,700lbs.

Supplied with Eyebolt and Hex Nuts for Cable support at 7'-6" Intervals

Swivel Pulleys (Pulley-01)

Swivel Pulley beam mount

2" Diameter Swivel Pulley  (Pulley-01)

Suitable For Use with 1/8" 7X7 or 7X19 Stand Galvanized Aircraft Cable

Supplied with 3/8" Diameter X 4" Long Turned Eyebolt, Hex Nuts and Pre-Assembled with 1/2" Hardware

 

Fixed Pulleys (Pulley-02)

fixed pulley mount

2" Diameter Fixed Mount Pulley (Pulley-02)

Suitable For Use with 1/8" 7X7 or 7X19 Stand Galvanized Aircraft Cable

Pre-Mounted with #10-24 Hardware on a Zinc Plated, Right Angle Bracket (3/16" Thick)

Supplied with 3/8" Hardware for Mounting to Conveyor Side Channel

 

Mounting Brackets

Small Bracket Sold separately BKT-0

No hardware included

Large Bracket Sold in pairs only BKT-02

All hardware included

Photo Eye Control Brackets

PEBKT-21-000-21-00 4 & 1 Hole Bracket Assembly (Steel/Zinc)

 

Material: 12" Long X 1/2" Schedule 40 Zinc Plated Pipe with 3"X3"X3/16" Zinc Plated C.R.S. Plate

Allows for 12" Vertical or Horizontal Adjustment (Depending on Mounting Orientation)

Plate has 4 Mounting Holes (9/32" Dia.) on 2" Centers for Photo Control Attachment (Requires Angle or Swivel Type Adapter Bracket from Photo Control Manufaturer)

Plate Mounting Holes Allow for a Total of 4 Photo Control Mounting Orientations

Supplied with Zinc Plated 12" Long X 1/2" Schedule 40 Pipe and 2 hole (9/32" Diameter) Standoff Mounting Plate, Heavy Duty 1/2" Pipe Cross Clamp and all Necessary Hardware for Mounting to Equipment

 

(Note: This bracket assembly may be used with many popular photo controls that use the Universal 2" on center mounting pattern.)

PEBKT-00-000-21-00 1 Hole Bracket Assembly (Steel/Zinc)

PEBKT-21-000-00-00  4 Hole Bracket Assembly (Steel/Zinc)

PEBKT-23-000-23-00

Adjustable Photo Control Bracket with 18" 2 Hole Flag Style Bracket

PEBKT-00-000-22-00

Photo Control Bracket 3 hole Assembly (Reflector Not Included)

Reflectors

PEBKT-00-000-00-13 Reflectors

PEBKT-00-000-00-13

3-1/4" Diameter Corner Cube Retroreflector

Plastic Housed with 3/16" Diameter Hole for Screw Type Mounting

Suitable for Use with Polarized Photo Controls

PEBKT-00-000-00-23 Reflector

PEBKT-00-000-00-23

3-1/4" Diameter Corner Cube Retroreflector

Aluminum Housed with 3/16" Diameter Hole for Screw Type Mounting

Suitable for Use with Polarized Photo Controls

Ball transfer Systems logo

Click logo to visit site.

© 2016 Creative Industrial Systems, LLC All Rights Reserved

Privacy Policy | Terms of Use